KeelEazyis a self-adhesive (peel and stick) strip that provides a durable surface anywhere that abrasion is a concern. Ideally suited for the keel of kayaks, it is also used on boats, canoes, jet skis, car doors, etc.
KeelEazy Strips are easily applied to fiberglass, polyethylene, thermoformed ABS and metal surfaces and can be molded over compound curves with the use of a heat gun. The PVC material is only 1/32” thick and comes in 2”, 3” and 4” widths. The 2″ wide KeelEazy weighs only .6 ounces per foot.
“This is by far the best keel protection that I have ever used. It is light weight and very abrasion resistant.”
-Mike Henebry
“This product is wonderful. KeelEazy has even come out with a new product called HealEazy. It quickly installs under your heel where it rests on the hull of the kayak and prevents your heel from rubbing a hole in the bottom.”
-Big Wave
“I purchased a KeelEazy product from the online store at keeleazy.com, and I am very happy with the results following a week long kayak tour of the lower Colorado river through Lake Mojave. Whereas, other unprotected areas of the kayaks were scratched, the Keeleazy areas were very well protected.”
-Gene Matt
“I purchased 20 ft of the white for my P&H Cetus on-line from you guys. I’m very satisfied with the product and have recommended it to several friends. It took me about 20 minutes to apply, after watching your YouTube installation video. I’ve dragged my boat across the rocks on the coast of Maine, played in rock gardens and had a few scrapes. The KeelEazy strip has no damage to it. It’s definitely a better option than a fiberglass strip if you don’t need the extra rigidity you’d get from a glass strip.”
-Catherine Foley
Just wanted to tell you that I put the Keel eazy strip on my boat and it worked great. I am really happy with it. It was indeed easy to apply. Only took me about twenty minutes. I was a little wary at first about the area turning up to the bow and stern. I was concerned about getting some buckling, but using my heat gun and a cloth to apply pressure it layed down perfectly. A great product. Thanks!
-Ray
“This is by far the best keel protection that I have ever used. It is light weight and very abrasion resistant.”
-Mike Henebry
“This product is wonderful. KeelEazy has even come out with a new product called HealEazy. It quickly installs under your heel where it rests on the hull of the kayak and prevents your heel from rubbing a hole in the bottom.”
-Big Wave
“I purchased a KeelEazy product from the online store at keeleazy.com, and I am very happy with the results following a week long kayak tour of the lower Colorado river through Lake Mojave. Whereas, other unprotected areas of the kayaks were scratched, the Keeleazy areas were very well protected.”
-Gene Matt
“I purchased 20 ft of the white for my P&H Cetus on-line from you guys. I’m very satisfied with the product and have recommended it to several friends. It took me about 20 minutes to apply, after watching your YouTube installation video. I’ve dragged my boat across the rocks on the coast of Maine, played in rock gardens and had a few scrapes. The KeelEazy strip has no damage to it. It’s definitely a better option than a fiberglass strip if you don’t need the extra rigidity you’d get from a glass strip.”
-Catherine Foley
Just wanted to tell you that I put the Keel eazy strip on my boat and it worked great. I am really happy with it. It was indeed easy to apply. Only took me about twenty minutes. I was a little wary at first about the area turning up to the bow and stern. I was concerned about getting some buckling, but using my heat gun and a cloth to apply pressure it layed down perfectly. A great product. Thanks!
-Ray
KeelEazy has been protecting beautiful bottoms for 12 years!
It comes in a variety of colors and widths. It can be used on the full length of your keel or on specific wear spots. We cut it to the desired length.